- MACHINE VISION LENSES
- ITS LENSES
- 360° LENSES
- INTELLIGENT HOME LENSES
- AUTOMOTIVE LENSES
- UV LENSES
- PRECISION OPTICS
- OPTICAL COATING
The secret of laser equipment maintenance
Laser processing is a fast-developing special processing technology. It has the characteristics of high precision, fast speed and strong adaptability. At the same time, it has the advantages of narrow slits, good processing flexibility, and small thermal shock area. It has become one of the key technologies for China to develop new industries and improve traditional manufacturing.
How to achieve efficient and high-quality operation of laser cutting machine, its maintenance is the key. If we only know how to operate and ignore routine maintenance, it will affect laser cutting The normal operation of the machine, how to use the efficiency of the laser cutting equipment to maximize the efficiency. The job of NCY, the following is how Dahan Laser teaches users to do a good job of repairing laser cutting equipment.
(1) Once a week, the dust and dirt in the machine can be sucked out by the vacuum cleaner. All electrical cabinets should be tightly dust-proof.
Second, check the straightness of the track and the verticality of the machine every six months. It is found that timely maintenance and debugging are abnormal. If you do not do this, then the cutting The effect may not be very good, and the error will increase, which will affect the quality. This is the top priority and must be done.
Third, regularly check the steel belt of the laser cutting machine to ensure the tension, otherwise, if there is a problem in the operation, it is likely to injure people and cause death. The steel strip looks small, but it is also serious.
(4) The guide rails should be cleaned regularly to remove dust and other impurities, to ensure that the equipment is normally wiped on the rack frequently, and lubricants are added to ensure that the lubrication is free of impurities. The guide rail should always be cleaned with lubricating oil, and the motor should also be clean and lubricated. Drain the oil regularly. The machine can go better, cut more accurately, and the cutting quality will be improved.
(5) The dual-focus laser cutting head is a fragile material on the laser cutting machine, which has caused damage to the laser cutting head for a long time.
Regular inspection and repair. If there is deformation or other forms, then you should know that the laser cutting head is a bit damaged and needs to be replaced. No replacement will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing to reduce the product. The laser cutting head is produced by a professional manufacturer, and it must be carefully checked when buying to avoid problems with the use time.